How to record a podcast with up to three online guests

Invite up to three online guests, talk together through live browser audio, and place every synchronized local recording on a separate timeline track.

Updated

Summary. StudioEditor combines a live browser conversation for a host and up to three guests with separate local recordings. The host controls Record and Stop, sees continuous capture on the live waveform, and receives every uploaded guest take at the matching timeline start.

Quick answer. Save the project, click Guest Link, send the same private expiring invitation to up to three guests, and connect the microphones. Everyone can hear each other, but only the host controls Record and Stop. StudioEditor captures the host with a live waveform, compensates for each guest’s clock offset, records every guest locally, and places the separate takes at the same timeline start.

A live call and a good podcast recording solve different problems

The host and guests need low-latency audio to have a natural conversation, but recording only the transmitted call can bake connection compression and dropouts into the final episode.

Separate local recordings sound better, but they must share a start reference and remain under one person’s control. Otherwise a participant may start late, stop early, or deliver a file that is difficult to align with the others.

Record with up to three online guests step by step

  1. Save the episode project

    Open the full audio editor and save the project before creating a guest invitation. Guest recording is attached to that project so completed takes can return to its timeline.

  2. Create and send the Guest Link

    Click Guest Link beside Record Voice, copy the private expiring URL, and send the same link directly to up to three invited participants. Regenerate the link to invalidate the previous URL, or close it when the session is finished.

  3. Connect every microphone

    Each guest opens the link, enters a display name, gives recording consent, chooses a microphone, and joins. The host clicks Connect microphone in the guest dialog. Once connected, the host and up to three guests can all hear each other through direct browser connections.

    Tip. Every participant should wear headphones. Speakers can feed remote voices back into a microphone and create echo in both the conversation and local take.

  4. Choose the host inputs and timeline start

    Configure Record Voice in the editor and place the playhead where the take should begin. The host recording and every connected guest recording use that same timeline start.

  5. Start and stop from the editor

    Press Record in StudioEditor. The editor prepares all connected guests, estimates their clock offsets, sends synchronized start instructions, and draws the host waveform as the playhead advances. Guests do not operate separate recording controls. Press Stop in the editor to end every take.

  6. Wait for every guest take to upload

    After Stop, each guest browser prepares and uploads its local recording. Keep every guest page open until it reports that the recording was sent. StudioEditor then adds each guest audio file to a separate Voice track at the matching timeline position.

  7. Review synchronization and sound

    Play a section with a quick exchange, interruption, or clap and confirm that both voices align. Keep each speaker on a separate Speech track for leveling, editing, AutoDuck, and export.

Keep the conversation live and the recordings separate

Create a saved project, invite up to three guests, connect every microphone, and control the synchronized recording from the editor.

Open the audio editor

How synchronized guest recording works

The live conversation and the production recording share microphone access but serve different purposes in the session.

StudioEditor multitrack editor receiving synchronized host and online guest recordings
The host controls transport while separate host and guest recordings arrive on Voice tracks at the same timeline position.

Multi-person live browser audio

A small mesh of direct WebRTC connections carries the host and guest microphones so the host and up to three guests can all hear the conversation while recording.

Host-controlled synchronized capture

The editor prepares every connected guest browser, estimates each remote clock offset, and sends matching start and stop messages so participants are not responsible for transport control.

Continuous host capture and live waveform

The host microphone is captured on the browser audio thread while the editor draws the waveform and recording playhead separately, so timeline rendering does not remove samples from the saved take.

Local guest quality and separate timeline placement

Each guest browser records its microphone locally, uploads the completed take through the private session, and returns its intended timeline start so StudioEditor can place every participant on a separate track alongside the host.

Three renewable guest slots

One Guest Link accepts up to three guests at a time. A fourth participant sees that the session is full and can join after another guest leaves and releases a slot.

Revocable invitations

Guest links expire and can be regenerated or closed by the host. A regenerated link makes the previous invitation unusable.

Frequently asked questions

Do guests start and stop their own recordings?

No. Once guests join and permit microphone access, the host’s Record and Stop actions control every synchronized local recording in the connected guest browsers.

Can everyone hear each other?

Yes. The host and up to three guests connect their microphones through direct browser audio so everyone in the session can hear the conversation. Headphones are strongly recommended to prevent echo and feedback.

Where do guest recordings appear?

After each guest browser uploads its completed take, StudioEditor places it on a separate Voice track using the same intended timeline start as the host recording.

What happens if the guest closes the page too early?

That guest’s upload may not finish. Ask every guest to keep the page open until it reports that the recording was sent, especially after a long take or on a slow connection.

Can I disable an old guest link?

Yes. Regenerate the invitation to replace it or close the link entirely. Guest links also have an expiry time shown in the host dialog.

Explore the tools behind this workflow